- Make
- CATERPILLAR
- Model
- 436C (Backhoe Loaders)
- Engine
- D / DT
Application |
Recommendation |
Capacity (ltr) |
|
---|---|---|---|
Engine (D / DT)
|
1st choice
|
Refer To Technical (a) |
7.3
|
2nd choice |
Gulf Supreme Duty LE 15W-40 | ||
Transmission
|
1st choice
|
Refer To Technical |
15.0 / 18.0
(b)
|
2nd choice |
Gulf HT Fluid TO-4 30 | ||
Hydraulics
|
Refer To Technical (c, d) |
37.9
|
|
Coolant
|
Refer to Technical |
18.9 - 21.6
|
|
Brake Fluid
|
1st choice
|
Gulf Super Duty CF 10W |
0.7
|
2nd choice |
Gulf HT Fluid TO-4 10W | ||
Front Powered Axle
|
1st choice
|
Gulf Gear MP 85W-140 (e) |
7.5
|
2nd choice |
Gulf Gear MT 85W-140 | ||
Front Powered Axle Final Drives (each)
|
1st choice
|
Gulf Gear MP 85W-140 (f) |
0.8
|
2nd choice |
Gulf Gear MT 85W-140 | ||
Rear Axle (AWS)
|
Gulf Universal Tractor Transmission Fluid 80W |
8.3
|
|
Rear Axle (standard)
|
Gulf Universal Tractor Transmission Fluid 80W |
24.0
|
|
Rear Reduction Hubs (each, AWS)
|
Gulf Universal Tractor Transmission Fluid 80W |
1.6
|
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- Transmission & torque converter (2WD) and powershift (2WD and All Wheel Drive); 15 ltr; Transmission & torque converter (All Wheel Drive): 18 ltr
- c.
- Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
- d.
- Alternative recommendations: -5°C to 45°C, HY CAT HYDO 20W; 0°C to 50°C, Refer To Technical; -20°C to 40°C, Gulf HT Fluid TO-4 10W; -15°C to 50°C, Refer To Technical; -20°C to 40°C, Refer To Technical / Gulf Supreme Duty XLE 10W-30
- e.
- Alternative recommendations: -30°C to 40°C, 75W-90; -20°C to 40°C, 80W-90; -10°C to 50°C, 85W-140; 0°C to 40°C, 90
- f.
- Alternative recommendations: -30°C to 40°C, 75W-90; -20°C to 40°C, 80W-90; -10°C to 50°C, 85W-140; 0°C to 40°C, 90
General Notes
There are no notes to display for this model
Oil Change Intervals
Hydraulics
- Months Max
- 18
- Hours Max
- 3000